ENG A-STOP Warning Light Does Not Come ON with Ignition “ON” and Engine Stopped (but Engine Can Be Started)
Precautions: Precautions for Diagnosing Trouble · Precautions for Servicing ENG A-STOP System · Precautions for Replacing ENG A-STOP Control Module · Precautions for Control Systems · General safety (00)
Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
DTC check
1)Check for DTC related to CAN communication.
Is there any CAN related DTC(s) detected?
|
Go to troubleshooting for applicable DTC.
|
Go to Step 2.
|
| 2 |
DTC check
1)Check for DTC related to combination meter.
Is there any combination meter related DTC(s) detected?
|
Go to troubleshooting for applicable DTC.
|
Replace ENG A-STOP control module and recheck for DTC.
|