ENG A-STOP Warning Light Remains ON or Blinking with Ignition “ON”
Precautions: Precautions for Diagnosing Trouble · Precautions for Servicing ENG A-STOP System · Precautions for Replacing ENG A-STOP Control Module · Precautions for Control Systems · General safety (00)
Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
ENG A-STOP OFF switch check
1)Check ENG A-STOP OFF switch.
Is check result OK?
|
Go to Step 2.
|
Replace ENG A-STOP OFF switch.
|
| 2 |
DTC check
1)Set ignition “OFF”.
2)Set ignition “ON”.
3)Check for DTC.
Is there any DTC(s) detected?
|
Go to troubleshooting for applicable DTC.
|
Replace combination meter and recheck for DTC.
If ENG A-STOP warning light still remains ON or blinking, replace ENG A-STOP control module and recheck for DTC.
|