Home › COMMUNICATION SYSTEM › MULTIPLEX COMMUNICATION › MULTIPLEX COMMUNICATION SYSTEM

MULTIPLEX COMMUNICATION SYSTEM > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here


If malfunction code is displayed during DTC check, check the circuit corresponding to the code in the table below. Proceed to the page given for the circuit.

MULTIPLEX COMMUNICATION SYSTEM 
DTC No.
Detection Item
Trouble Area
See page
B1214
Short to B+ in Door System Communication Bus Malfunction
1. Theft warning ECU assembly (Theft deterrent ECU)
2. Multiplex network door ECU back (Back door ECU)
3. Wire harness
4. Instrument panel junction block assembly (Body ECU)
Click here
B1215
Short to GND in Door System Communication Bus Malfunction
1. Theft warning ECU assembly (Theft deterrent ECU)
2. Multiplex network door ECU back (Back door ECU)
3. Wire harness
4. Instrument panel junction block assembly (Body ECU)
Click here
B1269
Theft Deterrent ECU Communication Stop
1. Theft warning ECU assembly (Theft deterrent ECU)
2. Wire harness
Click here
B1287
Back Door ECU Communication Stop
1. Multiplex network door ECU back (Back door ECU)
2. Wire harness
Click here