16400
1.REMOVE RADIATOR ASSEMBLY
Remove the radiator (See page Engine / Hybrid System>1GR-FE COOLING>RADIATOR>REMOVAL).
16206
2.DISCONNECT WATER BY-PASS PIPE SUB-ASSEMBLY
15671
3.REMOVE OIL FILTER BRACKET
13471
4.REMOVE CRANKSHAFT PULLEY
11301C
5.REMOVE FRONT CRANKSHAFT OIL SEAL
Using a screwdriver, pry out the oil seal.
Tape the screwdriver tip before use.
Do not damage the surface of the oil seal press fit hole or crankshaft.