Home › Engine / Hybrid System › 1GR-FE COOLING › THERMOSTAT › 2009.08–2013.08
RM1440E _51 Engine / Hybrid System _056129 1GR-FE COOLING _0273912 THERMOSTAT A

1GR-FE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16572D 6.DISCONNECT NO. 2 RADIATOR HOSE

a.
A223077

Disconnect the No. 2 radiator hose.


Hide 16031 7.REMOVE WATER INLET WITH THERMOSTAT

HINT:

If the thermostat was not installed, cooling efficiency would decrease. Even if the engine tends to overheat, do not remove the thermostat.


a.
A223010

Remove the 3 nuts, water inlet with thermostat and gasket.