Home › Engine / Hybrid System › 1GR-FE LUBRICATION › ENGINE OIL COOLER › 2009.08–2013.08
RM1440E _51 Engine / Hybrid System _056130 1GR-FE LUBRICATION _0273917 ENGINE OIL COOLER A

1GR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install a new seal washer to the bolt.


b.

Install the oil cooler with the bolt and nut.

Torque:
for bolt : 68 N*m (693 kgf*cm, 50 ft.*lbf)
for nut : 10 N*m (102 kgf*cm, 7 ft.*lbf)


c.
A224741E04
2.76,1.188 2.938,1.354 0.177,0.167 10 false *1 2.552,1.615 2.729,1.781 0.177,0.167 10 false *2

Install the 2 hoses.

HINT:

The direction of the hose clamp is indicated in the illustration.


Text in Illustration
*1 Upward
*2 Rearward


Hide 16206 3.CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A224742E06
2.813,1.167 2.979,1.333 0.167,0.167 10 false *1 2.594,1.594 2.76,1.76 0.167,0.167 10 false *2

Connect the 2 hoses and water by-pass pipe.

HINT:

The direction of the hose clamp is indicated in the illustration.


Text in Illustration
*1 Upward
*2 Rearward


b.

Install the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51405A 11.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY