Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.
86161D
1.INSTALL NO. 1 SPEAKER MOUNTING BRACKET
Install the No. 1 speaker mounting bracket with the 2 bolts.
86160P
2.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
Connect the connector.
Align the positioning pins of the front No. 2 speaker assembly with the instrument panel sub-assembly to temporarily install the front No. 2 speaker assembly.
Install the front No. 2 speaker assembly with the 2 screws.
Do not touch the cone of the front No. 2 speaker assembly.
When installing the front No. 2 speaker assembly to the instrument panel sub-assembly, be careful that the wires do not get caught between the parts.
55408F
3.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
62212
4.INSTALL FRONT PILLAR GARNISH LH