58766A
1.REMOVE JACK BOX HOLE COVER
76626E
2.REMOVE REAR QUARTER PANEL MUDGUARD LH
76625G
3.REMOVE REAR QUARTER PANEL MUDGUARD RH
Use the same procedure as for the LH side.
52159
4.REMOVE REAR BUMPER COVER
82163
5.REMOVE NO. 3 FLOOR WIRE
89341A
6.REMOVE NO. 1 ULTRASONIC SENSOR
Detach the 2 claws to remove the No. 1 ultrasonic sensor from the ultrasonic sensor retainer.
Use the same procedure as for the other side.
89348D
7.REMOVE ULTRASONIC SENSOR CLIP
Using a screwdriver, detach the claw to remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor as shown in the illustration.
| *1 | Protective Tape |
Tape the screwdriver tip before use.
Use the same procedure as for the other side.
89348A
8.REMOVE NO. 2 ULTRASONIC SENSOR RETAINER
Detach the 3 claws to remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.
Use the same procedure as for the other side.
89348
9.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER
Detach the 4 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.
Use the same procedure as for the other side.