Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH › 2010.08–2013.08
RM1440E _58 Vehicle Interior _056156 THEFT DETERRENT / KEYLESS ENTRY _0274068 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 53510 1.INSTALL HOOD LOCK ASSEMBLY

a.

Apply MP grease to the sliding areas of the lock.


b.

Connect the hood lock control cable assembly.


c.

Connect the connector.


d.

Install the hood lock assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 53629 2.INSTALL HOOD LOCK CONTROL CABLE COVER

a.
B267442

Pass the hood lock control cable assembly through the hood lock control cable cover.


b.

Attach the claw to install the hood lock control cable cover.


c.

Install the 2 screws.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 86520 3.INSTALL LOW PITCHED HORN ASSEMBLY

Hide 86510 5.INSTALL HIGH PITCHED HORN ASSEMBLY