Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT INNER BELT ASSEMBLY
RM1440E _58 Vehicle Interior _056162 SEAT BELT _0274129 REAR NO. 2 SEAT INNER BELT ASSEMBLY A

SEAT BELT  REAR NO. 2 SEAT INNER BELT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.

Remove the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY>REMOVAL).


Hide 71693 2.REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH

Hide 73590 3.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

B241710

a.

Using a T45 "TORX" socket wrench, remove the bolt and inner belt assembly.