Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT OUTER BELT ASSEMBLY
RM1440E _58 Vehicle Interior _056162 SEAT BELT _0274131 REAR NO. 2 SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR NO. 2 SEAT OUTER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).



PROCEDURE

Hide 73608 1.INSTALL REAR SEAT OUTER BELT ANCHOR PLATE SUB-ASSEMBLY LH

B241722E02
0.958,0.802 0.875,0.875 false 0.979,0.823 0.896,0.896 false 0.99,0.844 0.917,0.917 false 1.01,0.865 0.896,0.969 false 1.01,0.896 0.917,0.99 false 1.021,0.917 0.927,1.01 false 0.927,0.99 0.688,1.417 false 0.573,1.427 0.875,1.656 0.302,0.229 10 false *a

a.

Install the anchor plate with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the anchor plate sub-assembly to overlap the protruding parts of the vehicle body.


Text in Illustration
*a Protruding Part


Hide 73090A 2.INSTALL SEAT BELT ANCHOR PLATE ASSEMBLY (for RH Side)

a.

Install the anchor plate with the 2 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73570 3.INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

U149781

a.

Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the bolt as shown in the illustration.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Install the rear No. 1 seat outer belt shoulder anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 62560C 4.INSTALL REAR WINDOW SIDE GARNISH ASSEMBLY LH

Hide 62580F 5.INSTALL REAR NO. 2 WINDOW SIDE GARNISH ASSEMBLY LH

Hide 64740C 6.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

a.

Attach the 7 clips, 5 claws and 2 guides to install the deck trim side panel.


b.

Install the 3 bolts and 2 screws.


c.

Install the rear No. 1 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


d.
B242825E02
1.875,1.427 2.354,1.5 false 2.396,1.417 2.573,1.573 0.177,0.156 10 false *a

for LH Side:

Install the rear No. 2 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the anchor plate sub-assembly to overlap the protruding parts of the vehicle body.


Text in Illustration
*a Protruding Part


e.
B453807E01
1.531,1.542 1.667,1.542 1.667,1.542 1.854,1.448 false 1.375,1.448 1.542,1.698 0.167,0.25 10 true *a

for RH Side:

Install the rear No. 2 seat outer belt floor anchor with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the anchor plate sub-assembly to overlap the protruding parts of the vehicle body.


Text in Illustration
*a Protruding Part


Hide 64713F 7.INSTALL FRONT DECK SIDE TRIM COVER LH

Hide 64725J 8.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 73233A 9.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 62332C 10.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 13.INSTALL REAR NO. 2 SEAT ASSEMBLY

a.

Install the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY>INSTALLATION).