Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR NO. 2 SEAT ASSEMBLY
Remove the rear No. 2 seat assembly (See pageVehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY>REMOVAL).
58371F
2.REMOVE REAR NO. 1 FLOOR STEP COVER
67934
3.REMOVE QUARTER SCUFF PLATE LH
67918D
4.REMOVE REAR DOOR SCUFF PLATE LH
62332C
5.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
73233A
6.REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER
64725J
7.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
64713F
8.REMOVE FRONT DECK SIDE TRIM COVER LH
64740C
9.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.
Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.
for RH Side:
Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.
Remove the 3 bolts and 2 screws.
Detach the 7 clips, 5 claws and 2 guides and remove the deck trim side panel.
62580F
10.REMOVE REAR NO. 2 WINDOW SIDE GARNISH ASSEMBLY LH
62560C
11.REMOVE REAR WINDOW SIDE GARNISH ASSEMBLY LH
73570
12.REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and rear No. 2 seat outer belt shoulder anchor.
Remove the bolt and rear No. 2 seat outer belt assembly.
73608
13.REMOVE REAR SEAT OUTER BELT ANCHOR PLATE SUB-ASSEMBLY LH
Remove the bolt and anchor plate.
73090A
14.REMOVE SEAT BELT ANCHOR PLATE ASSEMBLY
Remove the 2 bolts and anchor plate.