Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › from 2013.08
RM1440E _58 Vehicle Interior _056165 INTERIOR PANELS / TRIM _0274157 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


PROCEDURE

Hide 55843A 1.REMOVE NO. 1 HEATER TO REGISTER DUCT

a.
B239293

Remove the 4 screws and No. 1 heater to register duct.


Hide 55844 2.REMOVE NO. 2 HEATER TO REGISTER DUCT

a.
B239294

Remove the 4 screws and No. 2 heater to register duct.


Hide 55971C 3.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.
B239291

Remove the screw.


b.

Detach the 2 claws to remove the No. 1 side defroster nozzle duct.


Hide 55972C 4.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.
B239292

Remove the screw.


b.

Detach the 2 claws to remove the No. 2 side defroster nozzle duct.


Hide 55845A 5.REMOVE NO. 3 HEATER TO REGISTER DUCT

a.
B239289

Remove the 2 screws.


b.

Detach the claw to remove the No. 3 heater to register duct.


Hide 55950G 6.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B239290

Remove the 3 screws and defroster nozzle assembly.


Hide 83290D 7.REMOVE ACCESSORY METER ASSEMBLY

Hide 82142 9.REMOVE NO. 2 INSTRUMENT PANEL WIRE

a.

Disconnect the connector.


b.

Detach the 17 clamps to remove the No. 2 instrument panel wire.

B354454


Hide 73960A 10.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 89120 11.REMOVE AUTOMATIC LIGHT CONTROL SENSOR