53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
52119A
2.REMOVE FRONT BUMPER COVER
Put protective tape around the front bumper cover.
Remove the 3 bolts, 10 screws and 6 clips.
Detach the 14 claws to remove the front bumper cover with radiator grille.
| *1 | Protective Tape | - | - |
Disconnect 3 connectors.
52521
3.REMOVE UPPER CENTER FRONT BUMPER RETAINER
53298
4.REMOVE COOL AIR INTAKE DUCT (for 4WD)
Remove the 4 clips and cool air intake duct.
52129B
5.REMOVE FRONT BUMPER LOWER COVER
Remove the clip.
Remove the 5 bolts and front lower bumper cover.
52822
6.REMOVE AIR INTAKE DUCT LH
Remove the clip and bolt.
Remove the 2 screws and air intake duct LH.
52821
7.REMOVE AIR INTAKE DUCT RH
Use the same procedure as for the LH side.
53294C
8.REMOVE RADIATOR SIDE DEFLECTOR LH
53293C
9.REMOVE RADIATOR SIDE DEFLECTOR RH
52611
10.REMOVE FRONT BUMPER ENERGY ABSORBER
52021
11.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Remove the screw, 6 nuts and front bumper reinforcement sub-assembly.
52026B
12.REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH
52025B
13.REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
52116A
14.REMOVE FRONT BUMPER SIDE SUPPORT LH
52115A
15.REMOVE FRONT BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52103
16.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH
52102
17.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH
Use the same procedure as for the LH side.