PARKING BRAKE CABLE > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR CONSOLE BOX ASSEMBLY |
Remove the rear console box assembly (Click here).
| 3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
Remove the No. 1 parking brake cable assembly (Click here).
| 4. REMOVE FUEL TANK SUB-ASSEMBLY |
Remove the fuel tank sub-assembly (Click here).
| 5. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER |
| 6. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY |
![]() |
Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.
![]() |
Remove the No. 1 parking brake cable heat insulator.
Remove the 5 bolts from the No. 2 parking brake cable assembly.

![]() |
Remove the clip and disconnect the No. 2 parking brake cable assembly from the parking brake equalizer.
| *1 | Clip |
![]() |
Pinch the claws of the No. 2 parking brake cable and push the cable outside of the vehicle slightly.
| 7. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY |
![]() |
Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.
Remove the 4 bolts from the No. 3 parking brake cable assembly.

![]() |
Remove the clip and disconnect the parking brake cable assembly No. 3 from the parking brake equalizer.
| *1 | Clip |
![]() |
Pinch the claws of the No. 3 parking brake cable and push the cable outside of the vehicle slightly.