STEERING COLUMN ASSEMBLY > INSTALLATION |
| 1. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY |
Align the matchmarks on the No. 2 steering intermediate shaft and power steering gear.
Install the bolt.
| 2. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY |
Install the 4 bolts.
| 3. CONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY |
Align the matchmarks on the No. 2 steering intermediate shaft assembly and steering intermediate shaft assembly.
Install the bolt.
| 4. INSTALL NO. 1 FRONT FENDER APRON TO FRAME SEAL LH |
Install the front No. 1 fender apron to frame seal LH with the 5 clips.
| 5. INSTALL STEERING COLUMN ASSEMBLY |
Align the matchmarks on the steering intermediate shaft and steering column.
Install the steering column with the 4 nuts.
Install the bolt.
Attach the claws to connect the wire harness.
| 6. INSTALL NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY |
Install the instrument lower panel airbag assembly (Click here).
| 7. INSTALL TRANSPONDER KEY AMPLIFIER (w/ Transponder Key) |
Install the transponder key amplifier (Click here).
| 8. INSTALL COMBINATION SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY |
Using pliers, grip the claws of the clamp and install the combination switch assembly with spiral cable sub-assembly to the steering column assembly with the clamp.
Connect the connectors to the combination switch with spiral cable.
| 9. INSTALL STEERING COLUMN UPPER COVER |
Attach the claw to install the steering column upper cover.
Attach the 4 clips to install the steering column upper cover to the instrument cluster finish panel.
| 10. INSTALL STEERING COLUMN LOWER COVER |
Attach the 2 claws to install the steering column lower cover.
Install the 2 screws.
| 11. INSTALL STEERING WHEEL ASSEMBLY |
Install the steering wheel assembly (Click here).
| 12. CHECK FRONT WHEELS FACING STRAIGHT AHEAD |
| 13. INSTALL FRONT WHEEL LH |
| 14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 15. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).