FRONT SHOCK ABSORBER > INSTALLATION |
| 1. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING |
Install the front shock absorber with coil spring (upper side) with the 3 new nuts.
Install the front shock absorber with coil spring (lower side) to the steering knuckle and insert the 2 bolts and 2 new nuts.
| 2. INSTALL FRONT STABILIZER LINK ASSEMBLY LH |
Install the front stabilizer link assembly to the front shock absorber assembly with a new nut.
Using a socket hexagon wrench 6 mm, fix the stud bolt and install the front stabilizer link assembly LH with a new nut.
| 3. INSTALL FRONT FLEXIBLE HOSE |
Install the front flexible hose to the front shock absorber assembly with the bolt.
| 4. INSTALL FRONT SUSPENSION SUPPORT DUST COVER LH |
Install the front suspension support dust cover LH to the front shock absorber with coil spring.
| 5. INSTALL FRONT SPEED SENSOR LH |
Install the front speed sensor LH to the front shock absorber assembly with the 2 clamps.
| 6. INSTALL FRONT WHEEL |
| 7. STABILIZE SUSPENSION |
Lower the vehicle and bounce it up and down several times to stabilize the front suspension.
| 8. INSPECT STEERING WHEEL CENTER POINT |
| 9. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |
| 10. VSC SENSOR NEUTRAL MEMORIZATION |
| 11. HEIGHT CONTROL SENSOR SIGNAL INITIALIZE (w/ HID Headlight System) |
| 12. ADJUST HEADLIGHT AIMING (w/ HID Headlight System) |