POWER WINDOW CONTROL SYSTEM > Key-off Operation Function Operates even if Operating Conditions are not Satisfied |
| 1.CHECK OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF |
Check the power window master switch assembly operation function after the ignition switch is turned off.
| Result | Proceed to |
| When power window can still be operated even after opening driver door within approximately 45 seconds of ignition switch being turned off | A |
| When power window can still be operated even after approximately 45 seconds have elapsed after ignition switch turned off (for All Doors) | B |
| When power window can still be operated even after approximately 45 seconds have elapsed after ignition switch turned off (for Driver Side) | B |
Check the power window switch assembly operation function after the ignition switch is turned off.
| Result | Proceed to |
| When power window can still be operated even after opening driver door within approximately 45 seconds of ignition switch being turned off | C |
| When power window can still be operated even after approximately 45 seconds have elapsed after ignition switch turned off (for Front Passenger Side) | D |
|
| ||||
|
| ||||
|
| ||||
| A | |
| 2.READ VALUE USING GTS (DOOR COURTESY SWITCH) |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Master Switch / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| D Door Courtesy SW | Driver side door courtesy light switch signal / ON or OFF | ON: Driver side door opened OFF: Driver side door closed | - |
|
| ||||
| OK | ||
| ||
| 3.READ VALUE USING GTS |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Master Switch / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| P Door Courtesy SW | Front passenger side door courtesy light switch signal / ON or OFF | OK: Front passenger side door opened NG: Front passenger side door closed | - |
|
| ||||
| OK | ||
| ||
| 4.CHECK OPERATION (POWER WINDOW SWITCH) |
Check the power window regulator master switch assembly and power window regulator switch assembly operation function after the ignition switch is off.
| Result | Proceed to |
| Operate (for both driver side and front passenger side switches) | A |
| Operate (for driver side switch only) | A |
| Operate (for front passenger side switch only) | B |
|
| ||||
| A | |
| 5.REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |
Remove the power window regulator master switch assembly (Click here).
Check the power window regulator master switch assembly operates (Click here).
| Result | Proceed to |
| Does not operate | A |
| Operate | B |
|
| ||||
| A | ||
| ||
| 6.REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
Remove the power window regulator switch assembly (Click here).
Check the power window regulator switch assembly operates (Click here).
| Result | Proceed to |
| Does not operate | A |
| Operate | B |
|
| ||||
| A | ||
| ||