DTC B1620 Side Airbag Sensor RH Circuit Malfunction |
DTC B16F4 Side Airbag Sensor RH Mismatch |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1620 |
|
|
| B16F4 |
|
| 1.CHECK SIDE NO. 2 AIRBAG SENSOR ASSEMBLY RH |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Interchange the side No. 2 airbag sensor assembly RH with LH and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1620 or B16F4 is output. | A |
| DTC B1625 or B16F5 is output. | B |
| DTCs B1620, B1625, B16F4 and B16F5 are not output. | C |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Return the side No. 2 airbag sensor assembly RH and LH to their original positions and connect the connectors.
| *1 | Side No. 2 Airbag Sensor Assembly LH |
| *2 | Airbag ECU Assembly |
|
| ||||
|
| ||||
| A | ||
| ||