Home › Engine / Hybrid System › FA20 FUEL › FUEL PUMP ECU
RM2090E _51 Engine / Hybrid System _060667 FA20 FUEL _0297506 FUEL PUMP ECU A

FA20 FUEL  FUEL PUMP ECU  INSTALLATION  


PROCEDURE

Hide 89570A 1.INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

a.

Attach the fuel pump control ECU assembly bracket to the body attachment hole, and pass the stud bolt through the hole in the body.


b.

Install the fuel pump control ECU assembly with the nut.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

NOTICE:

Do not reuse the fuel pump control ECU assembly if it has been subjected to shocks.



c.

Connect the fuel pump control ECU assembly connector.


Hide 64714D 2.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

Hide 64721 3.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

Hide 71460S 4.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

Hide 62311B 6.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL