63310
1.INSTALL ROOF HEADLINING ASSEMBLY
Put the roof headlining assembly into the vehicle through the front passenger side door.
Do not damage the roof headlining assembly or body interior.
Engage the clip at the front of the roof headlining, and install the roof headlining assembly.
Connect the antenna cord sub-assembly connectors.
Install the 3 clips at the rear of the roof headlining.
Engage the 2 clamps and connect the connector from the front pillar LH.
Engage the 3 clamps and connect the connector from the front pillar RH.
74348
2.INSTALL VISOR HOLDER
Engage the 2 claws install the 2 visor holders.
74320
3.INSTALL VISOR ASSEMBLY LH
Connect the connector (w/ Illumination).
Install the visor assembly LH with the 2 screws.
74310
4.INSTALL VISOR ASSEMBLY RH
Use the same procedure as for the LH side.
81260A
5.INSTALL MAP LIGHT ASSEMBLY
62412
6.INSTALL CENTER PILLAR GARNISH LH
Engage the 2 guides and clip.
Install the center pillar garnish LH with the 2 bolts and clip.
62411
7.INSTALL CENTER PILLAR GARNISH RH
Use the same procedure as for the LH side.
62639
8.INSTALL REAR QUARTER TRIM GARNISH FRONT LH
Engage the claw and clip.
Install the rear quarter trim front garnish LH with the 2 bolts.
62638
9.INSTALL REAR QUARTER TRIM FRONT GARNISH RH
Use the same procedure as for the LH side.
62462A
10.INSTALL REAR WINDOW SIDE GARNISH LH
Engage the guide and 2 clips.
Install the rear window side garnish LH with the bolt.
62461A
11.INSTALL REAR WINDOW SIDE GARNISH RH
Use the same procedure as for the LH side.
62606A
12.INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH
Install the 2 lid cover clips from the quarter trim lid sub-assembly LH.
If there is any damage, be sure to replace the lid cover clip with a new one.
Engage the 2 guides and 6 claws and install the quarter trim lid sub-assembly LH.
| *1 | Lid Cover Clip |
62605Q
13.INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
64715D
14.INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
Engage the 8 clips install the quarter trim panel assembly LH.
Install the clip.
64714D
15.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
Use the same procedure as for the for LH side.
64722
16.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH
Fold down the rear seatback assembly.
Engage the 2 clips install the luggage compartment inner trim cover LH.
64721
17.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH
Use the same procedure as for the LH side.
71470S
18.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH
71460S
19.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
73220
20.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH
73210
21.INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
62112
22.INSTALL COWL SIDE TRIM BOARD LH
Engage the 2 clips install the cowl side trim board LH.
Install the clip.
62111C
23.INSTALL COWL SIDE TRIM BOARD RH
Use the same procedure as for the LH side.
62312B
24.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Align the alignment mark on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.
| *a | Alignment Mark |
After installation, check that the corners fit correctly.
62311B
25.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
67914
26.INSTALL FRONT DOOR SCUFF PLATE LH
Engage the 6 claws install the front door scuff plate LH.
67913
27.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
62212
28.INSTALL FRONT PILLAR GARNISH LH
62211
29.INSTALL FRONT PILLAR GARNISH RH
55409F
30.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
55408F
31.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
32.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL