Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM2090E _58 Vehicle Interior _060702 SEAT _0297720 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 72602A 1.INSTALL REAR SEATBACK LOCK STRIKER SUB-ASSEMBLY LH

a.

Install the 2 bolts and rear seatback lock striker sub-assembly LH.

Torque:
33 N*m (337 kgf*cm, 24 ft.*lbf)


Hide 72601A 2.INSTALL REAR SEATBACK LOOK STRIKER SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 3.INSTALL REAR SEATBACK LOCK STRIKER COVER LH

a.

Engage the 3 clips and install the rear seatback lock striker cover LH.


Hide 4.INSTALL REAR SEATBACK LOCK STRIKER COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 64330 5.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 62462A 6.INSTALL REAR WINDOW SIDE GARNISH LH

Hide 62461A 7.INSTALL REAR WINDOW SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62606A 8.INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH

Hide 62605Q 9.INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64715D 10.INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

a.

Engage the 8 clips and install the luggage compartment trim cover LH.


b.

Install the 3clips.


Hide 64714D 11.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 62312B 12.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door opening trim weatherstrip LH.


Hide 62311B 13.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 67913 15.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 71480B 16.INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY

a.

Install the 2 bolts and bench type rear seatback assembly.

Torque:
33 N*m (337 kgf*cm, 24 ft.*lbf)


b.

Install the 3 clips and rear seatback cover.


Hide 17.INSTALL REAR FLOOR CARPET ASSEMBLY

a.

Install the 2 clips and rear floor carpet assembly.


Hide 71470S 18.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH

a.

Engage the hook and install the separate type rear seat cushion assembly LH.


b.

Install the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 71460S 19.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.