Home › Engine / Hybrid System › FA20 EMISSION CONTROL › CANISTER
RM2090E _51 Engine / Hybrid System _060668 FA20 EMISSION CONTROL _0297510 CANISTER A

FA20 EMISSION CONTROL  CANISTER  INSTALLATION  


PROCEDURE

Hide 77740 1.INSTALL CHARCOAL CANISTER ASSEMBLY (for Metal Type)

a.

Install the canister base bracket to the charcoal canister assembly with 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Install the charcoal canister assembly with canister base bracket with the 2 bolts and the nut.

Torque:
Bolt : 7.5 N*m (76 kgf*cm, 66 in.*lbf)
Nut : 18 N*m (184 kgf*cm, 13 ft.*lbf)


c.
A281827E02
0.51,0.958 0.667,1.135 0.156,0.177 10 false 1 1.698,0.948 1.854,1.125 0.156,0.177 10 false 2

Connect the drain hose D as indicated by the arrows, in the order shown in the illustration.


d.
A281828

Connect the drain hose C as shown in the illustration.


Hide 77740S 2.INSTALL CANISTER PUMP MODULE (for Metal Type)

a.

Install the drain hose E.


b.

Connect the drain hose A and the drain hose B.


c.

Engage the clamp.


d.

Install the nuts and bracket B.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


e.

Install the 2 nuts and bracket A.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


f.

Engage the clip.


g.

Install the check valve with 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


h.

Connect the evaporation hose to the fuel pipe assembly.


i.

Engage the clip.


j.

Connect the drain hose A to the fuel filler pipe.


k.

Connect the drain hose B to the charcoal canister assembly.


Hide 3.INSTALL CHARCOAL CANISTER ASSEMBLY (for Clamp Type)

a.

Install the canister bracket A and canister bracket B to the charcoal canister assembly with 3 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Install the charcoal canister assembly with 2 bolts and nut.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the purge tube.


d.

Connect the drain hose and drain tube.


Hide 77720H 4.INSTALL FUEL OUTLET VALVE ASSEMBLY (for Clamp Type)

a.

Install the fuel outlet valve assembly to the canister bracket A.


b.

Connect the 2 evaporation hoses and drain hose to the fuel outlet valve assembly.


Hide 51206A 5.INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

Hide 41110 6.INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY