Home › Engine / Hybrid System › FA20 COOLING › WATER PUMP
RM2090E _51 Engine / Hybrid System _060670 FA20 COOLING _0297522 WATER PUMP A

FA20 COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.

Install a new water pump gasket and the engine water pump assembly with the 5 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)


Hide 16173 2.INSTALL WATER PUMP PULLEY

a.

Temporarily install the water pump pulley with the 3 bolts.


b.

Using SST, hold the water pump pulley and tighten the 3 bolts.

SST
09960-10010  (09962-01000, 09963-00700)

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 16361A 4.INSTALL FAN AND GENERATOR V BELT

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER