Home › Engine / Hybrid System › FA20 COOLING › COOLING FAN MOTOR
RM2090E _51 Engine / Hybrid System _060670 FA20 COOLING _0297525 COOLING FAN MOTOR A

FA20 COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363A 1.INSTALL NO. 2 COOLING FAN MOTOR (w/ Air Conditioning System)

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363 2.INSTALL COOLING FAN MOTOR (w/ Air Conditioning System)

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Connect the wire harness to the 2 cooling fan motors.


Hide 16363 3.INSTALL COOLING FAN MOTOR (w/o Air Conditioning System)

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361B 4.INSTALL NO. 2 FAN (w/ Air Conditioning System)

a.

Install the No. 2 fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16361 5.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16711 6.INSTALL FAN SHROUD

HINT:

Insert a cardboard or a blanket between the radiator assembly and the fan shroud to protect the radiator assembly.


a.

Engage the fitting sections in the bottom of the fan shroud with the fitting sections of the radiator assembly.

NOTICE:

Do not damage the outlet radiator hose, inlet radiator hose, No. 1 radiator hose, water filler sub-assembly, or air conditioner tube and accessory assembly.



b.

Attach the 2 claws and install the fan shroud to the radiator assembly.


c.

Connect the 2 cooling fan motor connectors and 2 clamps to the radiator assembly.


Hide 53201 7.INSTALL RADIATOR SUPPORT SUB-ASSEMBLY

Hide 53291B 8.INSTALL RADIATOR COVER PLATE

Hide 16502 12.INSTALL WATER FILLER SUB-ASSEMBLY

a.

Install the water filler sub-assembly with the 4 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 16470 13.INSTALL RADIATOR RESERVE TANK ASSEMBLY

Hide 52119A 14.INSTALL FRONT BUMPER COVER

Hide 17701 15.INSTALL AIR CLEANER CASE SUB-ASSEMBLY