83530
1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY
Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.
| *1 | Adhesive |
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.
Do not start the engine for at least 1 hour after installation.
Connect the engine oil pressure switch connector.
2.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4.INSPECT FOR OIL LEAK
Start the engine.
Check for engine oil leaks from the engine oil pressure switch assembly.
5.CHECK ENGINE OIL LEVEL