Home › Drivetrain › TX6A (AUTOMATIC TRANSMISSION / TRANSAXLE) › VALVE BODY ASSEMBLY
RM2090E _52 Drivetrain _060674 TX6A AUTOMATIC TRANSMISSION / TRANSAXLE _0297545 VALVE BODY ASSEMBLY A

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 17410 2.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 3.DRAIN AUTOMATIC TRANSMISSION FLUID

a.

Remove the drain plug and gasket, and drain the ATF.


b.

Install the drain plug and a new gasket.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 4.REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

Hide 35410 8.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C106931

Remove the bolt, detent spring cover and the detent spring.


b.
C106932

Remove the 19 bolts and the transmission valve body assembly.


c.
C109330E12
1.865,0.927 2.167,0.365 2.167,0.365 2.448,0.365 true 2.125,1.052 2.677,1.771 true 2.49,0.271 2.677,0.49 0.188,0.219 10 false *1 2.698,1.781 2.885,2 0.188,0.219 10 false *2

Disconnect the manual valve connecting rod sub-assembly from the manual valve lever sub-assembly.

Text in Illustration
*1 Manual Valve Connecting Rod Sub-assembly
*2 Manual Valve Lever Sub-assembly


d.
D027914E34
1.531,1.24 0.854,1.24 true 0.865,0.406 1.281,0.406 false 0.698,0.313 0.875,0.5 0.177,0.188 10 false *1 0.635,1.167 0.823,1.323 0.188,0.156 10 false *2

Remove the check ball body and the compression spring.

Text in Illustration
*1 Check Ball Body
*2 Compression Spring

NOTICE:

Do not drop the check ball body and compression spring.