Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicle.
86011C
1.INSTALL NOISE FILTER
Engage the guide and install the radio setting condenser.
Engage the 2 clamps.
Connect the connector.
82730
2.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
55606
3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55318C
5.INSTALL INSTRUMENT SIDE PANEL LH