Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55606
2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55606
3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
82730
4.REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
86011C
5.REMOVE NOISE FILTER
Disconnect the connector.
Disengage the 2 clamps.
Disengage the guide and remove the noise filter.