Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH › 2012.03–2016.06
RM2090E _58 Vehicle Interior _060696 DOOR LOCK _0297675 UNLOCK WARNING SWITCH A

DOOR LOCK  UNLOCK WARNING SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicle.



PROCEDURE

Hide 84052 1.INSTALL UN-LOCK WARNING SWITCH ASSEMBLY

a.

Attach the 2 claws to install the un-lock warning switch assembly.


b.

Connect the un-lock warning switch assembly connector.


Hide 45286 2.INSTALL UPPER STEERING COLUMN COVER

Hide 3.INSTALL LOWER STEERING COLUMN COVER

Hide 55606 4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

Hide 55606 5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

Hide 55422 6.INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

Hide 55405B 8.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY