Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicle.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55405B
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55403
3.REMOVE METER HOOD SUB-ASSEMBLY
55422
4.REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT
55606
5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
7.REMOVE LOWER STEERING COLUMN COVER
45286
8.REMOVE UPPER STEERING COLUMN COVER
84052
9.REMOVE UN-LOCK WARNING SWITCH ASSEMBLY
Disconnect the un-lock warning switch assembly connector.
Detach the 2 claws and remove the un-lock warning switch assembly.