Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicle.
55318C
1.REMOVE INSTRUMENT SIDE PANEL LH
55461A
2.REMOVE INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)
55405B
3.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)
55403
4.REMOVE METER HOOD SUB-ASSEMBLY
55422
5.REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)
55606
7.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
8.REMOVE LOWER STEERING COLUMN COVER
45286
9.REMOVE UPPER STEERING COLUMN COVER
84052
10.REMOVE UN-LOCK WARNING SWITCH ASSEMBLY
Disconnect the un-lock warning switch assembly connector.
Detach the 2 claws and remove the un-lock warning switch assembly.