89741
1.INSTALL DOOR CONTROL RECEIVER
Engage the guide and install the door control receiver.
Install the bolt.
Connect the connector.
Do not drop the door control receiver or apply impact on it.
When replacing or inspecting the door control receiver, do not change the wiring route or the length of the harness around the receiver.
64330
2.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
Engage the 4 clips and install the package tray trim panel assembly with the center stop light assembly.
Install the 4 clips.
Connect the connector.
62462A
3.INSTALL REAR WINDOW SIDE GARNISH LH
62461A
4.INSTALL REAR WINDOW SIDE GARNISH RH
Use the same procedure described for the LH side.
62606A
5.INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH
62605Q
6.INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
64715D
7.INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
64714D
8.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
Use the same procedure described for the LH side.
64722
9.CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER LH
64721
10.CONNECT LUGGAGE COMPARTMENT INNER TRIM COVER RH
Use the same procedure described for the LH side.
67914
11.INSTALL FRONT DOOR SCUFF PLATE LH
67913
12.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure described for the LH side.
62312B
13.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62311B
14.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
71470S
15.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH
71460S
16.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH