Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
73960A
1.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
If the hooks are not engaged in the correct order, the deployment part of the instrument panel passenger airbag assembly may be damaged.
Engage the 5 hooks as shown in the illustration to temporarily install the instrument panel passenger airbag assembly.
Push the instrument panel passenger airbag assembly to engage the 5 hooks.
55302C
2.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
3. PERFORM DIAGNOSTIC SYSTEM CHECK
4.INSPECT SRS WARNING LIGHT