1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a (R134a):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFC-134a(R134a))>REPLACEMENT)
for HFO-1234yf (R1234yf):
(See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT)
88704
2.SEPARATE SUCTION HOSE SUB-ASSEMBLY
88790E
3.SEPARATE AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
88515
4.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
Temporarily install the bolt for the suction hose sub-assembly halfway to the cooler expansion valve.
| *1 | Bolt For The Suction Tube Sub-assembly |
Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.
Remove the 2 O-rings from the evaporator pipe.
| *1 | Evaporator Pipe |