55900
1.INSTALL AIR CONDITIONING CONTROL ASSEMBLY
After aligning with the cables, engage the 2 claws and connect the heater control cable sub-assembly. (for RH side).
After aligning with the cables, engage the 2 claws and connect the heater control cable sub-assembly. (for LH side).
Connect each connector.
Engage the 6 claws.
Install the air conditioning control assembly with the 2 screws.
55475A
2.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55474C
3.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55405B
4.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
58810J
5.INSTALL CONSOLE BOX ASSEMBLY