Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › from 2016.06
RM2090E _58 Vehicle Interior _060706 INTERIOR PANELS / TRIM _0297758 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  INSTALLATION  


PROCEDURE

Hide 63310 1.INSTALL ROOF HEADLINING ASSEMBLY

a.
B315251

Put the roof headlining assembly into the vehicle through the front passenger side door.

NOTICE:

Do not damage the roof headlining assembly or body interior.



b.

Engage the clip at the front of the roof headlining, and install the roof headlining assembly.


c.

Connect the antenna cord sub-assembly connectors.


d.

Install the 3 clips at the rear of the roof headlining.


e.

Engage the 2 clamps and connect the connector from the front pillar LH.


f.

Engage the 3 clamps and connect the connector from the front pillar RH.


Hide 74348 2.INSTALL VISOR HOLDER

a.

Engage the 2 claws install the 2 visor holders.


Hide 74320 3.INSTALL VISOR ASSEMBLY LH

a.

Connect the connector (w/ Illumination).


b.

Install the visor assembly LH with the 2 screws.


Hide 74310 4.INSTALL VISOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62412 6.INSTALL CENTER PILLAR GARNISH LH

a.

Engage the 2 guides and clip.


b.

Install the center pillar garnish LH with the 2 bolts and clip.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 62411 7.INSTALL CENTER PILLAR GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62639 8.INSTALL REAR QUARTER TRIM GARNISH FRONT LH

a.

Engage the claw and clip.


b.

Install the rear quarter trim front garnish LH with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 62638 9.INSTALL REAR QUARTER TRIM FRONT GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62462A 10.INSTALL REAR WINDOW SIDE GARNISH LH

a.

Engage the guide and 2 clips.


b.

Install the rear window side garnish LH with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 62461A 11.INSTALL REAR WINDOW SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62606A 12.INSTALL QUARTER TRIM LID SUB-ASSEMBLY LH

a.
B459462E01
0.354,0.542 1.052,0.906 true 0.156,0.427 0.469,0.625 0.313,0.198 10 false *1

Install the 3 lid cover clips to the quarter trim lid sub-assembly LH.

NOTICE:

If there is any damage, be sure to replace the lid cover clip with a new one.



b.

Engage the 2 guides, 3 clips and 6 claws to install the quarter trim lid sub-assembly LH.

Text in Illustration
*1 Lid Cover Clip


Hide 62605Q 13.INSTALL QUARTER TRIM LID SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64715D 14.INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

a.

Engage the 8 clips install the quarter trim panel assembly LH.


b.

Install the clip.


Hide 64714D 15.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

HINT:

Use the same procedure as for the for LH side.


Hide 64722 16.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH

a.

Fold down the rear seatback assembly.


b.

Engage the 2 clips install the luggage compartment inner trim cover LH.


Hide 64721 17.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 71470S 18.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH

Hide 71460S 19.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH

Hide 73220 20.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH

Hide 73210 21.INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62112 22.INSTALL COWL SIDE TRIM BOARD LH

a.

Engage the 2 clips install the cowl side trim board LH.


b.

Install the clip.


Hide 62111C 23.INSTALL COWL SIDE TRIM BOARD RH

HINT:

Use the same procedure as for the LH side.


Hide 62312B 24.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.
B315249E01
2.535,0.419 2.705,0.572 0.170,0.152 10 *a 2.284,0.669 2.284,0.509 2.284,0.509 2.529,0.509 false

Align the alignment mark on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

Text in Illustration
*a Alignment Mark

NOTICE:

After installation, check that the corners fit correctly.



Hide 62311B 25.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 67914 26.INSTALL FRONT DOOR SCUFF PLATE LH

a.

Engage the 6 claws install the front door scuff plate LH.


Hide 67913 27.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.


Hide 55409F 30.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

Hide 55408F 31.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

Hide 32.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)