Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the RHD vehicle.
84820
1.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
Engage the 4 claws to install the power window regulator master switch assembly.
2.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
67602
3.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
74222
4.INSTALL DOOR ARMREST COVER LH
5.INITIALIZE POWER WINDOW CONTROL SYSTEM
6.INSPECT POWER WINDOW OPERATION