Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the LHD vehicle.
84810
1.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
Engage the 4 claws to install the power window regulator switch assembly.
2.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
67601
3.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
Use the same procedure as for the LH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY).
74221
4.INSTALL DOOR ARMREST COVER RH
Use the same procedure as for the LH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY).
5.INITIALIZE POWER WINDOW CONTROL SYSTEM
6.INSPECT POWER WINDOW OPERATION