77035
1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
Engage the 11 clamps.
Check that the matchmark of the fuel lid lock control cable sub-assembly is aligned with the center of the clamp.
| *a | Matchmark |
Install the fuel lid lock control cable sub-assembly as indicated by the arrows in the order shown in the illustration.
77306
2.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Connect the fuel lid lock control cable sub-assembly.
Install the 2 nuts and fuel lid lock open lever sub-assembly.
Return the floor mat.
77306C
3.INSTALL HANDLE COVER
Install the handle cover with the screw.
64376A
4.INSTALL NO. 2 PACKAGE TRAY TRIM SPACER
Install the No. 2 package tray trim spacer.
Install the 3 clips.
64715D
5.INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
64714D
6.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
Use the same procedure as for the LH side.
64722
7.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/ Side Marker Light)
64722
8.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH (w/o Side Marker Light)
64721
9.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH
Install the 5 clips and the luggage compartment inner trim cover RH.
58387
10.INSTALL REAR FLOOR FINISH PLATE
64711
11.INSTALL LUGGAGE COMPARTMENT FLOOR MAT
71470S
12.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY LH
71460S
13.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
Use the same procedure as for the LH side.
14.INSTALL FRONT SEAT ASSEMBLY
62312B
15.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62311B
16.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
67914
17.INSTALL FRONT DOOR SCUFF PLATE LH
67913
18.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.