77035
1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
Engage the 7 clamps and install the fuel lid lock control cable sub-assembly.
Check that the matchmark of the fuel lid lock control cable sub-assembly is aligned with the center of the clamp.
| *a | Matchmark |
Install the fuel lid lock control cable sub-assembly as indicated by the arrows in the order shown in the illustration.
77306
2.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Connect the fuel lid lock control cable sub-assembly.
Install the 2 nuts and fuel lid lock open lever sub-assembly.
Return the floor mat.
77306C
3.INSTALL HANDLE COVER
Install the handle cover with the screw.
64376A
4.INSTALL NO. 2 PACKAGE TRAY TRIM SPACER
Install the No. 2 package tray trim spacer.
Install the 3 clips.
64714D
5.INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).
64721
6.INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH
Install the 5 clips and the luggage compartment inner trim cover RH.
58387
7.INSTALL REAR FLOOR FINISH PLATE
64711
8.INSTALL LUGGAGE COMPARTMENT FLOOR MAT
71460S
9.INSTALL SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY RH
Use the same procedure as for the LH side (See page Vehicle Interior>SEAT>REAR SEAT ASSEMBLY>INSTALLATION).
10.INSTALL FRONT SEAT ASSEMBLY
62311B
11.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).
67913
12.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).