Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84140
1.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
Using pliers, expand the clamp as shown in the illustration.
| *1 | Clamp |
While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.
Engage the claw.
Release the clamp to install the headlight dimmer switch assembly.
Connect the connector.
84650
2.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
3.INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY