Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › 2015.04–2016.06
RM2090E _59 Vehicle Exterior _060713 EXTERIOR PANELS / TRIM _0297829 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  INSTALLATION  


PROCEDURE

Hide 52119A 1.INSTALL FRONT BUMPER COVER

a.

Connect each connector.


b.

Engage the 7 claws to install the front bumper cover.

HINT:

Use the same procedure for the RH side and LH side.



c.

Install the clip.

HINT:

Use the same procedure for the RH side and LH side.



d.

Install the 4 clips.

HINT:

Use the same procedure for the RH side and LH side.



e.

Install the 7 clips.


f.

Install the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 52521B 2.INSTALL FRONT BUMPER UPPER RETAINER

a.

Install the front bumper upper retainer with the 5 bolts.


b.

Install the 2 clips.


Hide 81720 3.INSTALL FRONT MARKER LIGHT ASSEMBLY LH (w/ Side Marker Light)

Hide 81710 4.INSTALL FRONT MARKER LIGHT ASSEMBLY RH (w/ Side Marker Light)

HINT:

Use the same procedure described for the LH side.


Hide 81740 5.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH (w/o Side Marker Light)

Hide 81730 6.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY RH (w/o Side Marker Light)

Hide 85341A 7.INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER (w/ Headlight Cleaner System)