Home › Power Source / Network › FA20 (BATTERY / CHARGING) › CHARGING SYSTEM (for 150 A Type) › from 2019.03
RM2090E _57 Power Source / Network _060693 FA20 BATTERY / CHARGING _0396238 CHARGING SYSTEM(for 150 A Type) Y

FA20 BATTERY / CHARGING  CHARGING SYSTEM(for 150 A Type)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

*: Use the GTS.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.



·

The following 5 items are important points in the problem analysis:

What Vehicle model, system name
When Date, time, occurrence frequency
Where Road conditions
Under what conditions? Running conditions, driving conditions, weather conditions
How did it happen? Problem symptoms


Result:
Proceed to
NEXT



NEXT

3.INSPECT BATTERY VOLTAGE
3.INSPECT BATTERY VOLTAGE
Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

Result:
Proceed to
NEXT



NEXT

4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
a.

Use the GTS to check if the CAN communication system is functioning normally.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM


Result:
Result Proceed to
CAN DTCs are not output A
CAN DTCs are output B



A

5.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

B

5.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
a.

Using the GTS, inspect the LIN communication function to ensure there are no malfunctions in the communication system.

Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>DTC CHECK / CLEAR


Result:
Result Proceed to
DTC is not output A
DTC is output B



A

6.CHECK FOR DTC*

B

6.CHECK FOR DTC*
HINT:

Refer to DTC Check / Clear.

Click herePower Source / Network>FA20 (BATTERY / CHARGING)>CHARGING SYSTEM (for 150 A Type)>DTC CHECK / CLEAR


Result:
Result Proceed to
No code A
Trouble code B



A

7.REFER TO PROBLEM SYMPTOMS TABLE

B

7.REFER TO PROBLEM SYMPTOMS TABLE
HINT:

Refer to Problem Symptoms Table.

Click herePower Source / Network>FA20 (BATTERY / CHARGING)>CHARGING SYSTEM (for 150 A Type)>PROBLEM SYMPTOMS TABLE


Result:
Result Proceed to
Malfunctioning parts not confirmed A
Malfunctioning parts confirmed B



A

8.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

11.CONDUCT PARTS INSPECTION
8.OVERALL ANALYSIS AND TROUBLESHOOTING*
HINT:

Refer to Data List / Active Test.

Click herePower Source / Network>FA20 (BATTERY / CHARGING)>CHARGING SYSTEM (for 150 A Type)>DATA LIST / ACTIVE TEST


Result:
Result Proceed to
Malfunctioning parts not confirmed A
Malfunctioning parts confirmed B



A

9.CHECK ECU CIRCUIT

B

11.CONDUCT PARTS INSPECTION
9.CHECK ECU CIRCUIT
HINT:

Refer to Terminals of ECU.

Click herePower Source / Network>FA20 (BATTERY / CHARGING)>CHARGING SYSTEM (for 150 A Type)>TERMINALS OF ECU


Result:
Result
OK
NG



OK

10.CHECK FOR INTERMITTENT PROBLEMS

NG

11.CONDUCT PARTS INSPECTION
10.CHECK FOR INTERMITTENT PROBLEMS
HINT:

Refer to Symptom Simulation.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

11.CONDUCT PARTS INSPECTION
11.CONDUCT PARTS INSPECTION
Result:
Proceed to
NEXT



NEXT

12.IDENTIFY PROBLEM
12.IDENTIFY PROBLEM
Result:
Proceed to
NEXT



NEXT

13.ADJUST AND/OR REPAIR
13.ADJUST AND/OR REPAIR
Result:
Proceed to
NEXT



NEXT

14.CONDUCT CONFIRMATION TEST
14.CONDUCT CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END