The TCM uses the signals from the throttle position, engine speed and input speed, to monitor the engagement condition of the lock-up clutch.
Then the TCM compares the engagement condition of the lock-up clutch with the lock- up schedule in the TCM memory to detect mechanical troubles of the valve body, Torque converter assembly and automatic transaxle assembly (clutch, brake or gear, etc.).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate | Memory |
|---|---|---|---|---|---|---|
| P0741 | Torque Converter Clutch Pressure Control Solenoid Performance (Shift Solenoid SL) | When the lock-up operates and the engine speed is greatly different from the lock-up speed.
(2 trip detection logic) |
·
Valve body assembly ·
Torque converter assembly ·
TCM ·
Automatic transmission assembly |
Come on | Blinks | DTC stored |
MIL:"Comes on" means the MIL (Malfunction IndicatorLamp) illuminates.
Memory:"DTC stored" means the TCM stores the trouble code if the ECU detects the DTC detection condition.
Refer to the HYDRAULIC TEST.
Click hereDrivetrain>A4Q AUTOMATIC TRANSMISSION / TRANSAXLE>AUTOMATIC TRANSMISSION SYSTEM>HYDRAULIC TEST
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Refer to the TORQUE CONVERTER AND DRIVE PLATE.
Click hereDrivetrain>A4Q AUTOMATIC TRANSMISSION / TRANSAXLE>TORQUE CONVERTER AND DRIVE PLATE>INSPECTION
The Torque converter assembly operates normally.
| Proceed to |
|---|
| OK |
| NG |
OK
NG