Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
67918D
1.REMOVE REAR DOOR SCUFF PLATE (for Full-trim)
67935
2.REMOVE BACK DOOR SCUFF PLATE (for Full-trim)
73570
3.SEPARATE REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Full-trim)
Loosen the bolt and separate the floor anchor plate of the rear No. 2 outer seat belt assembly.
64740C
4.REMOVE DECK TRIM SIDE PANEL ASSEMBLY (for Full-trim)
62520P
5.REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Semi-trim)
62510P
6.REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH (for Semi-trim)
84231A
7.REMOVE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
Disconnect the connector.
Remove the bolt and the rear door courtesy light switch assembly.