Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY › 2011.11–2015.08
RM19Y0E _59 Vehicle Exterior _003017 DOOR / HATCH _0015261 HOOD LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Install the hood lock control cable assembly as shown in the illustration.


b.

Install the 2 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)

B297771C01
0.135,0.115 0.615,0.469 0.479,0.354 10 *A
*1 for LHD - -


B290270C01
0.125,0.125 0.573,0.427 0.448,0.302 10 *A
*1 for RHD - -



Hide 53510 2.INSTALL HOOD LOCK ASSEMBLY

a.
B297772

Apply MP grease to the sliding areas of the hood lock assembly.


b.

Connect the hood lock control cable.


c.

Install the hood lock with the 3 bolts.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 5.INSTALL NO. 2 HOOD LOCK CONTROL CABLE COVER (for LHD)

a.

Install the No. 2 hood lock control cable cover with the bolt.


Hide 6.INSTALL NO. 1 HOOD LOCK CONTROL CABLE COVER (for RHD)

HINT:

Use the same procedure as for the No. 2 hood lock control cable cover.


Hide 62112 7.INSTALL COWL SIDE TRIM BOARD LH (for LHD)

Hide 62111C 8.INSTALL COWL SIDE TRIM BOARD RH (for RHD)

HINT:

Use the same procedure as for the LH side.


Hide 67914B 9.INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

Hide 67913B 10.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

HINT:

Use the same procedure as for the LH side.