Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION MEMBER › from 2015.08
RM19Y0E _53 Suspension _002989 FRONT SUSPENSION _0015129 FRONT SUSPENSION MEMBER A

FRONT SUSPENSION  FRONT SUSPENSION MEMBER  REMOVAL  


PROCEDURE

Hide 48069 1.REMOVE FRONT LOWER NO.1 SUSPENSION ARM SUB-ASSEMBLY LH

Hide 45510 2.REMOVE STEERING GEAR ASSEMBLY

Hide 12361 4.REMOVE FRONT ENGINE MOUNTING INSULATOR (for LH Side)

a.

Attach the engine sling device to the engine hangers.


b.

Using an engine sling device and a chain block, hold the engine.

NOTICE:

Make sure that the sling angle is correct to prevent the engine assembly and engine hangers from being damaged or deformed.



c.
C332225C01
3.333,2.177 3.427,2.177 false
V100135

Bolt
V100136

Nut


Remove the 2 bolts and nut, shown in the illustration, then remove the front engine mounting insulator.


Hide 12361 5.REMOVE FRONT ENGINE MOUNTING INSULATOR (for RH Side)

a.

Attach the engine sling device to the engine hangers.


b.

Using an engine sling device and a chain block, hold the engine.

NOTICE:

Make sure that the sling angle is correct to prevent the engine assembly and engine hangers from being damaged or deformed.



c.
C332226C01
3.333,2.167 3.417,2.167 false
V100135

Bolt
V100136

Nut


Remove the 2 bolts and nut, shown in the illustration, then remove the front engine mounting insulator.


Hide 51201 6.REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY