16400
1.INSTALL RADIATOR ASSEMBLY
Install the fan with motor assembly with the 4 bolts.
Install the 2 grommets into the radiator lower support.
Install the radiator assembly into the vehicle.
Install the cooling fan motor connector and wire harness clamp.
53205
2.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Install the 2 grommets to the upper radiator support sub-assembly.
Install the upper radiator support sub-assembly with the 5 bolts.
Connect the clamp to the hood lock control cable.
32922A
3.INSTALL OIL COOLER OUTLET HOSE (for Automatic Transmission)
| *a | White Paint Mark |
| *b | Green Paint Mark |
| *c | Upper Side |
| *d | 60° |
Install a new oil cooler outlet hose with the 2 clips as shown in the illustration.
32921D
4.INSTALL OIL COOLER INLET HOSE (for Automatic Transmission)
| *a | Yellow Paint Mark |
| *b | Pink Paint Mark |
| *c | Upper Side |
| *d | 60° |
Install a new oil cooler inlet hose with the 2 clips as shown in the illustration.
16572D
5.CONNECT NO. 2 RADIATOR HOSE
| *a | Paint Mark |
| *b | Upper Side |
Connect the No. 2 radiator hose with the clip as shown in the illustration.
16571C
6.INSTALL NO. 1 RADIATOR HOSE
| *a | Paint Mark |
| *b | Upper Side |
| *c | RH Side |
Connect the No. 1 radiator hose with the 2 clips as shown in the illustration.
88460
7.CONNECT COOLER CONDENSER ASSEMBLY (w/ Air Conditioning System)
Temporarily tighten the cooler condenser assembly with the bolt A.
Fully tighten the cooler condenser assembly with the 4 bolts in the order shown in the illustration.
88561L
8.INSTALL LOWER AIR INLET GRILLE
53510
9.INSTALL HOOD LOCK ASSEMBLY
88561J
10.INSTALL UPPER AIR INLET GRILLE
17750A
11.INSTALL AIR CLEANER INLET ASSEMBLY
16470
12.INSTALL RADIATOR RESERVE TANK ASSEMBLY
Install the radiator reserve tank assembly with the bolt.
Connect the radiator reserve tank hose.
52119A
13.INSTALL FRONT BUMPER COVER
14.ADD ENGINE COOLANT
15.ADD AUTOMATIC TRANSMISSION FLUID (for Automatic Transmission)
16.INSPECT FOR COOLANT LEAK
17.INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK (for Automatic Transmission)
51441
18.INSTALL NO. 1 ENGINE UNDER COVER
19.INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEVEL (for Automatic Transmission)