53630
1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
Connect the cable clamps to install the hood lock control cable assembly as shown in the illustration.
Install the 2 bolts.
| *A | for LHD | - | - |
| *A | for RHD | - | - |
53510
2.INSTALL HOOD LOCK ASSEMBLY
Use the same procedure for the RHD and LHD vehicles.
Apply MP grease to the sliding areas of the hood lock assembly.
Connect the hood lock control cable assembly.
Install the hood lock assembly with the 3 bolts.
53301
3.INSPECT HOOD
53301
4.ADJUST HOOD
53629
5.INSTALL NO. 2 HOOD LOCK CONTROL CABLE COVER (for Tropic)
Engage the 2 claws to install the No. 2 hood lock control cable cover.
Install the bolt.
88561J
6.INSTALL UPPER AIR INLET GRILLE (except Tropic)
Engage the 3 claws to install the upper air inlet grille.
Install the bolt.
62112
7.INSTALL COWL SIDE TRIM BOARD LH (for LHD)
62111C
8.INSTALL COWL SIDE TRIM BOARD RH (for RHD)
Use the same procedure as for the LH side.
67914B
9.INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)
67913B
10.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)
Use the same procedure as for the LH side.
52119A
11.INSTALL FRONT BUMPER COVER